Powerline 600 Duo Wi-Fi Mini

Не са намерени никакви елементи.
Не са намерени никакви елементи.

Всички въпроси

Powerline 600 Duo Wi-Fi Mini

Не са намерени никакви елементи.
Не са намерени никакви елементи.

Нямам достъп до интернет и/или светодиодът на иконата „Начало“ не свети.

You must reset the adapters to their factory settings. To reset the adapters, please follow the steps below.

1. Свържетеадаптерите към разклонителя

Connect the adapters one after the other to a power strip.

   

2. Свържетеадаптерите с интернет

Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.

  

3Натиснетебутона „Connect & Secure“ (първият адаптер)

Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button on the right side of the device for 15 seconds.

 

4Натиснетебутона „Connect & Secure“ (вторият адаптер)

Press the “Connect & Secure” button located on the right side of the second device for 15 seconds.

  

5HomeLED мига

The home LEDs should start blinking.

 

6Devices are reset

All the LEDs must be green at the end of the operations.

 

Repeat the same operation for a third powerline. You can have up to eight Powerline 600 Mini on the same electrical installation.
After resetting all the devices, you can put them in the room where you need them.

Следвайте ни
Отказ от отговорност за 4 години гаранцияУведомление съгласно Закона за защита на личните данниОбщ регламент за безопасност на продуктите (GPSR) и използване на батерииwhitelist съхранение на сигурностСъответствие с PSTIПолитика за разкриване на уязвимостиПолитика за конфиденциалност и поверителностПравно уведомление и общи условия за ползване