Powerline 600 Duo Wi-Fi EU

Не са намерени никакви елементи.
Не са намерени никакви елементи.

Всички въпроси

Powerline 600 Duo Wi-Fi EU

Powerline 600 Duo Wi-Fi EU V2

Powerline 600 Triple Wi-Fi EU V2

Не са намерени никакви елементи.
Не са намерени никакви елементи.

Нямам достъп до интернет и/или светодиодът на иконата „Начало“ не свети.

1Connect the adapters to a powerstrip

Connect the adapters one after the other to a power strip.

 

2Connect the adapters to Internet

Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.

 

3Press the "Connect & Secure" button (first device)

Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button on the front panel for 10 seconds.

 

4Press the Connect & Secure button (second device)

Press the “Connect & Secure” button on the front panel of the second device for 10 seconds.

 

5Home icon blinks on the devices

The home LEDs should start blinking.

 

6Devices are reset

All the LEDs must be green at the end of the operations.

   

Repeat the same operation for a third powerline. You can have up to eight Powerline 600 on the same electrical installation.
After resetting all the devices, you can put them in the room where you need them.

 
Следвайте ни
Отказ от отговорност за 4 години гаранцияУведомление съгласно Закона за защита на личните данниОбщ регламент за безопасност на продуктите (GPSR) и използване на батерииwhitelist съхранение на сигурностСъответствие с PSTIПолитика за разкриване на уязвимостиПолитика за конфиденциалност и поверителностПравно уведомление и общи условия за ползване