Powerline 600 Duo Mini
Всички въпроси
Нямам достъп до интернет и/или светодиодът на иконата „Начало“ не свети.
Нямам достъп до интернет и/или светодиодът на иконата „Начало“ не свети.
You must reset the adapters to their factory settings. To reset the adapters please
follow the steps below
1Put the adapters on a power strip
Connect the adapters one after the other to a power strip.
2. Свържетеадаптера с интернет
Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.
3Натиснетебутона „Connect & Secure“ (първият адаптер)
Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button located on the right side of the device for 15 seconds.
4Натиснетебутона „Connect & Secure“ (вторият адаптер)
Press the “Connect & Secure” button located on the right side of the second device for 15 seconds.
5HomeLED мига
The home icon LED should start blinking.
6Adapters are reset
All the LEDs must be green at the end of the operations.
Repeat the same operation for a third powerline. You can have up to eight Powerline 600 Mini on the same electrical installation.
After pairing all the devices, you can put them in the room where you need them.