Wi-Fi 7 РЕПИТЕР 3600

Не са намерени никакви елементи.

Не са намерени никакви елементи.

Всички въпроси

Wi-Fi 7 РЕПИТЕР 3600

I plug in the repeater and nothing happens. What should I check?

The Power LED is flashing. Is that normal?

Какво означават цветовете на светодиодите?

The Wi-Fi LED is red. What should I do?

Where should I plug in the repeater for the best result?

How do I start the first-time setup?

I cannot find the default Wi-Fi network STRONG_Repeater in the list.

What is the Web UI password and how do I create it?

I have forgotten the Web UI password. What can I do?

What is the difference between Wireless Extender mode and Wireless Access Point mode?

How do I run the five-step setup wizard?

My router's network does not appear in the list at Step 3.

Should I use the same name as my router or a different one for the extended network?

How do I pair the repeater with my router using WPS?

Devices can connect to the extended network but have no Internet access.

The speed on the extended network is much lower than what I get from the router directly.

How do I reach the Web UI once the repeater is connected to my home network?

How do I rename the extended network or change its password?

I have a new router. How do I connect the repeater to it?

How do I switch from Wireless Extender to Wireless Access Point mode (or vice versa)?

How do I restore the repeater to its factory default settings?

What can I use the Ethernet port for?

Как да актуализирам фърмуера?

How do I save my configuration before making changes?

How do I schedule an automatic weekly reboot?

The LEDs disturb me at night. Can I turn them off?

What is the warranty period?

Where do I find the serial number and firmware version to contact support?

Не са намерени никакви елементи.

Не са намерени никакви елементи.

Какво означават цветовете на светодиодите?

The repeater has three LEDs on the front face:

Power — Solid blue: powered and running normally. Flashing blue: starting up or applying settings. Off: no power.
Wi-Fi — Solid blue: connected to your router and signal is good. Solid red: connected but signal too weak, or not connected to any host network. Off: the Wi-Fi radio is disabled.
WPS — Flashing blue: WPS pairing in progress (2-minute window). Solid blue: WPS pairing succeeded. Off: no WPS session.

Tips: All three LEDs can be switched off from the Web UI (Advanced Settings > System > LED Control) without affecting the repeater's operation — useful in a bedroom.

Следвайте ни