Powerline 500 Triple Pack | PL500TRI
Alle spørgsmål
Powerline 500 Triple Pack | PL500TRI
Jeg har ikke adgang til internettet, og/eller LED-lampen på »hjem«-ikonet lyser ikke.
You must reset the adapters to their factory settings. To reset the adapters please follow the steps below:
Se flere ofte stillede spørgsmål1Connect the adapters to a powerstrip
Connect the adapters one after the other to a power strip.
2Connect the adapters to Internet
Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.
3Press the "Connect & Secure" button (first device)
Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button on the front panel for 10 seconds.
4Press the Connect & Secure button (second device)
Press the “Connect & Secure” button on the front panel of the second device for 10 seconds. You have up to two minutes to do it.
5Home icon blinks on the devices
The home icon LED should start blinking.
6Devices are reset
All the LEDs must be green at the end of the operations.
Repeat the same operation for a third powerline. You can have up to eight powerline 500 on the same electrical installation.
After pairing all the devices, you can put them in the room where you need them.