PL600SDUOEU
Alle Fragen
PL600SDUOEU
Powerline 600 Duo EU V2
Ich habe keinen Internetzugang und/oder die LED des „Home“-Symbols leuchtet nicht.
You must reset the adapters to their factory settings. To reset the adapters please follow the steps below:
1Connect the adapters to a power strip
Connect the adapters one after the other to a power strip.
2. Verbinden Siedie Adapter mit dem Internet
Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.
3Drücken Siedie Taste „Connect & Secure“ (erstes Gerät)
Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button on the front panel for 10 seconds.
4Drücken Siedie Taste „Connect & Secure“ (zweites Gerät)
Press the “Connect & Secure” button on the front panel of the second device for 10 seconds. You have up to two minutes to do it.
5Die LED „Home“blinkt
The home icon LED should start blinking.
6The adapters are reset
All the LEDs must be green at the end of the operations.
Repeat
Repeat the same operation for a third powerline. You can have up to 8 Powerline 600 on the same electrical installation.
After pairing all the devices, you can put them in the room where you need them.