Powerline 600 Duo Mini
Alle Fragen
Powerline 600 Duo Mini
Ich habe keinen Internetzugang und/oder die LED des „Home“-Symbols leuchtet nicht.
Ich habe keinen Internetzugang und/oder die LED des „Home“-Symbols leuchtet nicht.
You must reset the adapters to their factory settings. To reset the adapters please
follow the steps below
1. Schließen Siedie Adapter an eine Steckdosenleiste an.
Connect the adapters one after the other to a power strip.
2. Verbinden Sieden Adapter mit dem Internet
Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.
3 Drücken Siedie Taste „Connect & Secure“ (erster Adapter)
Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button located on the right side of the device for 15 seconds.
4. Drücken Siedie Taste „Connect & Secure“ (zweiter Adapter).
Press the “Connect & Secure” button located on the right side of the second device for 15 seconds.
5Die LED „Home“blinkt
The home icon LED should start blinking.
6Adapters are reset
All the LEDs must be green at the end of the operations.
Repeat the same operation for a third powerline. You can have up to eight Powerline 600 Mini on the same electrical installation.
After pairing all the devices, you can put them in the room where you need them.