Δεν βρέθηκαν αντικείμενα.

Δεν βρέθηκαν αντικείμενα.

ΦΩΤΟΓΡΑΦΙΚΗ ΜΗΧΑΝΗ FALKY SOLAR BATTERY

Όλες οι ερωτήσεις

Δεν βρέθηκαν αντικείμενα.

Δεν βρέθηκαν αντικείμενα.

ΦΩΤΟΓΡΑΦΙΚΗ ΜΗΧΑΝΗ FALKY SOLAR BATTERY

'SD card not detected' / How does recording work?

What do the LED colours mean?

The live view takes several seconds to load / Camera is offline

The intercom does not work / No sound from the camera

The camera is offline / How do I reset it?

Pairing fails / 'Connection successful' never appears

Night vision: Infrared mode vs Full Color mode — which should I use?

IP65 weatherproofing, sharing access and privacy

I receive no notifications / Too many false alerts

Πώς μπορώ να ενημερώσω το firmware;

How do I set up the camera for the first time?

How do I connect the camera to a new Wi-Fi network?

How do I configure active deterrence (siren, strobe, automatic response)?

Battery drains too fast / Solar panel is not charging

How do I configure active deterrence (siren, strobe, automatic response)?

Manual deterrence (immediate, on-demand):

Siren: Live view > Page 2 > Siren button. Tap to start, tap again to stop.
White Light: Live view > Page 2 > Light button. Manually illuminates the area.
Audio Warning + Strobe: Live view > Page 2 > Audio Warning and Strobe Light button. Triggers simultaneous audio warning and rapid LED strobe.

Automatic deterrence on detection (no manual action needed):

Go to Settings (⚙) > Alarm Management > Alert Linkage. Configure the camera to automatically trigger LED lights, the siren, or Audio Warning + Strobe whenever a detection occurs. You can set a schedule to limit activation to specific hours (e.g. night only).

Tips: For night-time intruder deterrence, the recommended setup is: AI Human Detection on + Alert Linkage set to Audio Warning + Strobe. This ensures the camera only reacts to confirmed human presence.

Ακολουθήστε μας