Powerline 600 Duo Wi-Fi EU

Δεν βρέθηκαν αντικείμενα.
Δεν βρέθηκαν αντικείμενα.

Όλες οι ερωτήσεις

Powerline 600 Duo Wi-Fi EU

Powerline 600 Duo Wi-Fi EU V2

Powerline 600 Triple Wi-Fi EU V2

Δεν βρέθηκαν αντικείμενα.
Δεν βρέθηκαν αντικείμενα.

Δεν έχω πρόσβαση στο Διαδίκτυο και/ή η λυχνία LED του εικονιδίου «home» δεν ανάβει.

1Connect the adapters to a powerstrip

Connect the adapters one after the other to a power strip.

 

2Connect the adapters to Internet

Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.

 

3Press the "Connect & Secure" button (first device)

Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button on the front panel for 10 seconds.

 

4Press the Connect & Secure button (second device)

Press the “Connect & Secure” button on the front panel of the second device for 10 seconds.

 

5Home icon blinks on the devices

The home LEDs should start blinking.

 

6Devices are reset

All the LEDs must be green at the end of the operations.

   

Repeat the same operation for a third powerline. You can have up to eight Powerline 600 on the same electrical installation.
After resetting all the devices, you can put them in the room where you need them.

 
Ακολουθήστε μας
4 χρόνια αποποίησης ευθύνης εγγύησηςΑνακοίνωση σχετικά με τον Νόμο περί ΔεδομένωνΓενικός κανονισμός για την ασφάλεια των προϊόντων (GPSR) & χρήση της μπαταρίαςwhitelist αποθήκευσης ασφαλείαςΣυμμόρφωση PSTIΠολιτική αποκάλυψης ευπαθειώνΠολιτική εμπιστευτικότητας και απορρήτουΝομική ειδοποίηση και γενικοί όροι χρήσης