HD-SATELLIITTIVASTAANOTIN SRT7040
Kaikki kysymykset
HD-SATELLIITTIVASTAANOTIN SRT7040
Miten voin selvittää laitteessani ilmeneviä ongelmia?
[Problem] | [Possible] [cause] | [What] [to] [do] |
The standby indicator does not light up
| The mains lead is unplugged/the multipoint connector is switched off. | Check the mains lead/switch the multipoint connector on.
|
No picture | The receiver can’t receive signal.
| Check the antenna cable, replace the cable, or connect the cable to the receiver tightly. |
Incorrect values of some tuner parameters. | Set the values of tuner parameters correctly in the {Installation} menu. | |
Wrong direction of the dish. | Check signal strength and adjust your dish correctly.
| |
No picture or sound on TV | The input is not selected on your TV. | Switch to the correct TV input.
|
The TV is not connected to the mains. Kaapeliliitäntä on viallinen.
| Tarkista virtajohto.
Firmly plug in the cables between the receiver and TV. | |
Audio muting.
| Press the [MUTE] button.
| |
TV power off.
| Käynnistä televisio. | |
Scrambled channel message | The channel is scrambled. | Valitse toinen kanava. |
No response to remote control | Vastaanotin on pois päältä. | Plug in and turn on the plug. |
The handset is not aimed correctly. | Aim the handset at the IR sensor. | |
The IR sensor is obstructed. | Tarkista, onko tiellä esteitä. | |
The handset batteries are exhausted. | Replace the handset batteries. | |
Password forgotten | The default password is <0000> | Contact the local Service Hotline or send an email to our support via www.strong-eu.com
|
The external USB HDD does not start. | Virrankulutus on liian suuri. | Liitä ylimääräinen virtalähde USB-kiintolevyyn. |
The receiver switches to standby automatically. | The {Auto Standby} function is activated and has reached the set time (default 3h). | Set the power down time or disable it in the {System Setup} > {Auto Standby} menu . |