HD MŰHOLDAS HD+ VEVŐKÉSZÜLÉK SRT7815
Minden kérdés
HD MŰHOLDAS HD+ VEVŐKÉSZÜLÉK SRT7815
Hogyan oldhatom meg a készülékemen felmerülő problémákat?
|
<Problem> |
<Cause> |
<Solution> |
|
The standby indicator does not light up |
The mains lead is unplugged/the multipoint connector is switched off. |
Check the mains lead/switch the multipoint connector on. |
|
There is no image, no sound, no display |
There is no power supply |
Check the connection cables |
|
Cables are missing or defective. |
Check your connecting cables |
|
|
A wrong video format was selected in the OSD settings |
Check the settings to make sure your TV supports the selected format |
|
|
There are small blocks in the video, occasionally no sound, occasionally no signal |
The signal is too weak |
Check for defective cables or connectors. Alternatively, reduce the coaxial cable length |
|
Zavaros csatorna üzenet |
The channel is scrambled. |
Válasszon egy másik csatornát. |
|
A távirányító nem reagál |
A vevőegység ki van kapcsolva. |
Plug in and turn on the plug. |
|
The handset is not aimed correctly. |
Aim the handset at the IR sensor. |
|
|
The IR sensor is obstructed. |
Check for obstructions. |
|
|
The handset batteries are exhausted. |
Replace the handset batteries. |
|
|
Password forgotten |
The default password is <0000> |
Contact the local Service Hotline or send an email to our support |
|
The external USB HDD does not start. |
Az energiafogyasztás túl magas. |
Csatlakoztasson egy kiegészítő tápegységet az USB-s merevlemez-meghajtójához. |
|
The receiver switches to standby automatically. |
The {Auto Standby} function is activated and has reached the set time (default 3 hours). |
Set the power down time or disable it in the {Settings}>{Time Setting} menu, parameter {Auto Standby After}. |