Powerline 1000 Duo Wi-Fi EU V2

Nem találtunk tárgyakat.
Nem találtunk tárgyakat.

Minden kérdés

Powerline 1000 Duo Wi-Fi EU V2

Nem találtunk tárgyakat.
Nem találtunk tárgyakat.

Nincs internet-hozzáférésem, és/vagy a „home” ikon LED-je nem világít

You must reset the adapters to their factory settings. To reset the adapters, please follow the steps below.

 

1Put the adapters on a power strip

Connect the adapters one after the other to a power strip.

 

2. Csatlakoztassaaz adaptereket az internethez

Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.

 

3Press the PAIR button (first adapter)

Once the adapter is plugged in and connected to the Ethernet, simply press the “PAIR” button on the right side of the device for 10 seconds.

 

4Press the PAIR button (second adapter)

Press the “PAIR” button located on the right side of the second device for 10 seconds.

  

Az 5HomeLED villog

The home LEDs should start blinking.

 

6Adapters are reset

All the LEDs must be green at the end of the operations.

 

Repeat the same operation for a third powerline. You can have up to eight Powerline 1000 on the same electrical installation.
After resetting all the devices, you can put them in the room where you need them.

 
Kövessen minket
4 év jótállási nyilatkozatÉrtesítés az adatvédelmi törvényrőlÁltalános termékbiztonsági rendelet (GPSR) és az akkumulátor használataBiztonsági tároló whitelistPSTI-megfelelőségA sebezhetőségek nyilvánosságra hozatalára vonatkozó politikaTitoktartási és adatvédelmi politikaJogi nyilatkozat és általános használati feltételek