HD-KABELMOTTAKER SRT3030
Alle spørsmål
HD-KABELMOTTAKER SRT3030
Hvordan feilsøker jeg problemer på enheten min?
<Problem> | <Possible cause> | <What to do> |
LED indicator not lit | Mains lead unplugged | Check mains plug |
Ingen signal funnet | Cable input is disconnected Orange signal LED is Off | Check cable lead Check with dealer
|
Ikke noe bilde eller lyd på TV eller forsterker | HDMI or SCART is not selected on your TV or amplifier or the unit is set to higher resolution as the TV supports. TV/amplifier is not switched on | Switch to correct TV/amplifier input Select lower resolution on receiver Switch TV/amplifier on.
|
Scrambled channel message | Kanalen er kryptert | Select alternative channel |
No response to remote control | Receiver off Remote not aimed correctly Front panel obstructed Remote batteries exhausted | Plug in and turn on plug Aim remote at front panel Check for obstructions Replace remote batteries |
Forgotten PIN code Forgotten channel lock code |
| Default PIN is 0000 Contact local Service Hotline or send email to our Support via www.strong.tv
|
Signals are interrupted or blocking is visible on screen | Cable signals are too weak or have reflections/interference.
| Press the <INFO> button on remote 2x to call up signal bars and check your cable connections and leads. Using (many) splitters in the signal lead might cause reflections/interference in the digital signal and distort reception. When in doubt, check with your dealer.
|
The receiver switches off automatically. | Auto Standby function enabled. | Disable auto standby. See chapter <7.4.3> for details. |
Avspilling av video (eller Timeshift) forårsaker frysing av bildet/makroblokker eller lignende forvrengning, spesielt på HD-innhold. | Read/write speed of your USB device could be too low. | Sørg for å bruke en USB-lagringsenhet med tilstrekkelig hastighet og lagringsplass. Minnepenner («USB») sticks ') støtter kanskje ikke tilstrekkelig hastighet. |