Powerline 600 Duo UK V2
Alle spørsmål
Powerline 600 Duo UK V2
Jeg har ikke tilgang til internett og/eller LED-lampen på «hjem»-ikonet lyser ikke.
You must reset the adapters to their factory settings. To reset the adapters please follow the steps below.
1Connect the adapters to a powers strip
Connect the adapters one after the other to a power strip.
2 Koble adapterne til Internett
Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices, otherwise the adapter will automatically go into standby mode.
3Press the Connect & Secure butoon (first adapter)
A) Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button on the front panel for 10 seconds.
4Press the Connect & Secure butoon (second adapter)
Press the “Connect & Secure” button on the front panel of the second device for 10 seconds. You have up to two minutes to press it.
5 blink på Hjem-LED-en
The home icon LED should start blinking on the devices.
6Adapters are reset
All the LEDs must be green at the end of the operations.
Repeat the same operation for a third powerline. You can have up to 8 Powerline 600 on the same electrical installation.
After pairing all the devices, you can put them in the room where you need them.