Powerline 1000 Duo Wi-Fi Mini UK

Nie znaleziono żadnych elementów.
Nie znaleziono żadnych elementów.

Wszystkie pytania

Powerline 1000 Duo Wi-Fi Mini UK

Nie znaleziono żadnych elementów.
Nie znaleziono żadnych elementów.

Nie mam dostępu do Internetu i/lub dioda LED przy ikonie „domu” nie świeci się

You must reset the adapters to their factory settings. To reset the adapters please follow the steps below: 

 

1. Podłączadaptery do listwy zasilającej

Connect the adapters one after the other to a power strip. 

 

2. Podłączadaptery do Internetu

Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices, otherwise the adapter will automatically go into standby mode. 

 

3Press the Connect & Secure button (first device)

Once the adapter is plugged in and connected to the Ethernet, simply press the Connect & Secure” button on the right side of the device for 10 seconds.

 

4Press the Connect & Secure button (second device)

Press the Connect & Secure” button located on the right side of the second device for 10 seconds. 

   

5.Dioda LED „Home” miga

 The home LEDs should start blinking. 

 

6Adapters are reset

All the LEDs must be green at the end of the operations. 
 

 

Repeat the same operation for a third powerline. You can have up to eight Powerline 1000 Mini on the same electrical installation. 

After resetting all the devices, you can put them in the room where you need them.  

  
Śledź nas
4 lata gwarancjiInformacja dotycząca ustawy o ochronie danychOgólne rozporządzenie w sprawie bezpieczeństwa produktów (GPSR) i korzystanie z bateriiwhitelist magazynu zabezpieczeńZgodność z PSTIPolityka ujawniania podatnościPoufność i polityka prywatnościNota prawna i ogólne warunki użytkowania