Powerline 600 Duo Wi-Fi Mini
Wszystkie pytania
Powerline 600 Duo Wi-Fi Mini
Nie mam dostępu do Internetu i/lub dioda LED przy ikonie „domu” nie świeci się.
You must reset the adapters to their factory settings. To reset the adapters, please follow the steps below.
1Plug the adapters in a power strip
Connect the adapters one after the other to a power strip.
2. Podłączadaptery do Internetu
Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.
3. Naciśnijprzycisk „Connect & Secure” (pierwszy adapter)
Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button on the right side of the device for 15 seconds.
4. Naciśnijprzycisk „Connect & Secure” (drugi adapter)
Press the “Connect & Secure” button located on the right side of the second device for 15 seconds.
5.Dioda LED „Home” miga
The home LEDs should start blinking.
6Devices are reset
All the LEDs must be green at the end of the operations.
Repeat the same operation for a third powerline. You can have up to eight Powerline 600 Mini on the same electrical installation.
After resetting all the devices, you can put them in the room where you need them.