Powerline 2000 Duo EU
Todas as perguntas
Powerline 2000 Duo EU
Não tenho acesso à Internet e/ou o LED do ícone «casa» não acende.
You must reset the adapters to their factory settings. To reset the adapters, please follow the steps below.
1Put the adapters on a power strip
Connect the adapters one after the other to a power strip.
2Ligaros adaptadores à Internet
Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.
3Primao botão «Connect & Secure» (primeiro adaptador)
Once the adapter is switched on and connected to Ethernet, simply press the “Secure & Connect” button on the right-hand side of the device for 15 seconds.
4Press the Connect & Secure button (second adapter)
Press the “Connect & Secure” button located on the right side of the second device for 15 seconds.
A luz LED «5Home» pisca
The home icon LED should start blinking.
6Adapters are reset
All the LEDs must be green at the end of the operations.
Repeat the same operation for a third powerline. You can have up to eight Powerline 2000 on the same electrical installation.
After pairing all the devices, you can put them in the room where you need them.