Поверлине 600 Трипле Мини UK
Сва питања
Поверлине 600 Трипле Мини UK
Немам приступ интернету и/или ЛЕД лампица иконе „почетна“ не светли.
You must reset the adapters to their factory settings. To reset the adapters, please follow the steps below.
1Plug the adapters to a power strip
Connect the adapters one after the other to a power strip.
2 Повежите адаптере на интернет
Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.
3 Притисните дугме Повежи и обезбеди (први адаптер)
Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button located on the right side of the device for 15 seconds.
4 Притисните дугме Connect & Secure (други адаптер)
Press the “Connect & Secure” button located on the right side of the second device for 15 seconds.
5Homr LED blinks
The home icon LED should start blinking.
6Adapters are rest
All the LEDs must be green at the end of the operations.
Repeat
Repeat the same operation for a third powerline. You can have up to eight Powerline 600 Mini on the same electrical installation.
After pairing all the devices, you can put them in the room where you need them.