PLW600MDUO
Сва питања
PLW600MDUO
Немам приступ интернету и/или ЛЕД лампица иконе „почетна“ не светли.
Морате ресетовати адаптере на фабричка подешавања. Да бисте ресетовали адаптере, пратите кораке у наставку.
1Plug the adapters into a power strip
Повежите адаптере један за другим на продужну кабл.

2 Повежите адаптере на интернет
Connect each adapter to a working device (Internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be communication between the devices, otherwise the adapter will automatically go into standby mode.

3 Притисните дугме Повежи и обезбеди (први адаптер)
Once the adapter is plugged in and connected to the Ethernet, press the Connect & Secure button on the right side of the device for 15 seconds.

4 Притисните дугме Connect & Secure (други адаптер)
Press the Connect & Secure button on the right side of the second device for 15 seconds.

5The home LEDs blink
Кућне ЛЕД диоде би требало да почну да трепћу.

6The devices are reset
All the LEDs must be green at the end of the operation.

Repeat the same operation for a third powerline. You can have up to eight Powerline 600 Mini adapters on the same electrical installation. After resetting all the devices, you can put them in the rooms where you need them.