HD-KABELMOTTAGARE SRT3032
Alla frågor
HD-KABELMOTTAGARE SRT3032
Hur felsöker jag problem på min enhet?
<Problem> | <Possible cause> | <What to do> |
LED indicator not lit | Mains lead unplugged | Check mains plug |
Ingen signal hittades | Cable input is disconnected Orange signal LED is Off | Check cable lead Check with dealer |
Ingen bild eller ljud på TV:n eller förstärkaren | HDMI eller SCART är inte valt på din TV eller förstärkare, eller så är enheten inställd på en högre upplösning än vad TV:n stöder. TV/amplifier is not switched on | Switch to correct TV/amplifier input Select lower resolution on receiver Switch TV/förstärkare på. |
Scrambled channel message | Kanalen är krypterad | Select alternative channel |
No response to remote control | Receiver off Remote not aimed correctly Front panel obstructed Remote batteries exhausted | Plug in and turn on plug Aim remote at front panel Check for obstructions Replace remote batteries |
Forgotten PIN code Forgotten channel lock code | Default PIN is 0000 Contact local Service Hotline or send email to our Support via www.strong.tv | |
Signals are interrupted or blocking is visible on screen | Cable signals are too weak or have reflections/interference. | Press the <INFO> button on remote 2x to call up signal bars and check your cable connections and leads. Using (many) splitters in the signal lead might cause reflections/interference in the digital signal and distort reception. When in doubt, check with your dealer. |
Mottagaren stängs av automatiskt. | Funktionen ”Auto Standby” är aktiverad. | Disable auto standby. See chapter <7.4.3> for details. |
Vid uppspelning av video (eller Timeshift) uppstår bildfrysningar, makroblock eller liknande bildförvrängningar, särskilt vid HD-innehåll. | Läs- och skrivhastigheten på din USB-enhet kan vara för låg. | Se till att använda ett USB-minne med tillräcklig hastighet och lagringsutrymme. USB-minnen (”USB- sticks”) har eventuellt inte tillräcklig hastighet. |