СУПУТНИКОВИЙ ПРИЙМАЧ HD SRT7015
Усі питання
СУПУТНИКОВИЙ ПРИЙМАЧ HD SRT7015
Як усунути несправності на моєму пристрої?
[Problem] | [Possible] [cause] | [What] [to] [do] |
The standby indicator does not light up | The mains lead is unplugged/the multipoint connector is switched off. | Check the mains lead/switch the multipoint connector on. |
No picture | The receiver can’t receive signal. | Check the antenna cable, replace the cable, or connect the cable to the receiver tightly. |
Incorrect values of some tuner parameters. | Set the values of tuner parameters correctly in the {Installation} menu. | |
Wrong direction of the dish. | Check signal strength and adjust your dish correctly. | |
No picture or sound on TV | The input is not selected on your TV. | Switch to the correct TV input. |
The TV is not connected to the mains. Неналежне підключення кабелю. | Перевірте шнур живлення. Firmly plug in the cables between the receiver and TV. | |
Audio muting. | Press the [MUTE] button. | |
TV power off. | Увімкніть пристрій « TV ». | |
Зашифрований канал повідомлення | The channel is scrambled. | Виберіть інший канал. |
Відсутність реакції на пульт дистанційного керування | Приймач вимкнений. | Plug in and turn on the plug. |
The handset is not aimed correctly. | Aim the handset at the IR sensor. | |
The IR sensor is obstructed. | Перевірте, чи немає перешкод. | |
The handset batteries are exhausted. | Replace the handset batteries. | |
Password forgotten | The default password is <0000> | Contact the local Service Hotline or email our support via www.strong-eu.com |
The external USB HDD does not start. | Споживання енергії занадто велике. | Підключіть додатковий блок живлення до вашого USB-накопичувача. |
The receiver switches to standby automatically. | The {Auto Standby} function is activated and has reached the set time (default 3h). | Set the power downtime or disable it in the {System Setup} > {Auto Standby} menu. |