Powerline 600 Duo Wi-Fi UK V2

Нічого не знайдено.
Нічого не знайдено.

Усі питання

Powerline 600 Duo Wi-Fi UK V2

Нічого не знайдено.
Нічого не знайдено.

У мене немає доступу до Інтернету та/або світлодіод на іконці «Домашня сторінка» не світиться.

У мене немає доступу до Інтернету та/або світлодіод на піктограмі «Домашня сторінка» не світиться.

You must reset the adapters to their factory settings. To reset the adapters, please follow the steps below.

 

1Put the adapters on a power strip

Connect the adapters one after the other to a power strip.

   

2. Підключітьадаптери до Інтернету

Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.

   

3Press the Connect & Secure button (first adapter)

Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button on the front panel for 10 seconds.

 

4Press the Connect & Secure button (second adapter)

Press the “Connect & Secure” button on the front panel of the second device for 10 seconds. You have up to two minutes to do it.

 

5. Світлодіод «Home» блимає

The home LEDs should start blinking.

 

6Adapters are reset

All the LEDs must be green at the end of the operations.

 

Repeat the same operation for a third powerline. You can have up to eight Powerline 600 on the same electrical installation.
After resetting all the devices, you can put them in the room where you need them.

 
Слідуйте за нами
Відмова від гарантії на 4 рокиПовідомлення щодо Закону про даніЗагальний регламент безпеки продукції (GPSR) та використання акумуляторівwhitelist безпечних сховищВідповідність ІПСШПолітика розкриття вразливостейПолітика конфіденційності та захисту персональних данихЮридичне повідомлення та загальні умови використання