HD KABELOVÝ PŘIJÍMAČ SRT3032
Všechny otázky
HD KABELOVÝ PŘIJÍMAČ SRT3032
Jak mohu řešit problémy se svým zařízením?
<Problem> | <Possible cause> | <What to do> |
LED indicator not lit | Mains lead unplugged | Check mains plug |
Nebylo nalezeno žádné signál | Cable input is disconnected Orange signal LED is Off | Check cable lead Check with dealer |
V televizi ani v zesilovači není obraz ani zvuk | Na televizoru nebo zesilovači není vybráno rozhraní HDMI ani SCART, případně je přístroj nastaven na vyšší rozlišení, než jaké televizor podporuje. Televizor/zesilovač není zapnutý | Switch pro nastavení vstupu televizoru/zesilovače Na přijímači vyberte nižší rozlišení Switch Televizor/zesilovač je zapnutý. |
Zakódovaný kanál zpráva | Kanál je zakódovaný | Select alternative channel |
No response to remote control | Receiver off Remote not aimed correctly Front panel obstructed Remote batteries exhausted | Plug in and turn on plug Aim remote at front panel Check for obstructions Replace remote batteries |
Zapomenutý PIN kód Zapomenutý kód pro uzamčení kanálu | Default PIN is 0000 Contact local Service Hotline or send email to our Support via www.strong.tv | |
Signals are interrupted or blocking is visible on screen | Cable signals are too weak or have reflections/interference. | Press the <INFO> button on remote 2x to call up signal bars and check your cable connections and leads. Using (many) splitters in the signal lead might cause reflections/interference in the digital signal and distort reception. When in doubt, check with your dealer. |
The receiver switches off automatically. | Auto Standby function enabled. | Disable auto standby. See chapter <7.4.3> for details. |
Playback of video (or Timeshift) is causing picture freeze/macro blocks or similar distortion, especially on HD content. | Read/write speed of your USB device could be too low. | Ujistěte se, že používáte USB paměťové zařízení s dostatečnou rychlostí a kapacitou. Flash disky („USB sticks“) nemusí poskytovat dostatečnou rychlost. |