PL600SDUOFR
Všechny otázky
PL600SDUOFR
Powerline 600 Duo EU V2
Nemám přístup k internetu a/nebo nesvítí LED kontrolka u ikony „domov“.
You must reset the adapters to their factory settings. To reset the adapters please follow the steps below.
1. Připojteadaptéry k prodlužovacímu kabelu s vypínačem
Connect the adapters one after the other to a power strip.
2. Připojteadaptéry k internetu
Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.
3Stisknětetlačítko „Connect & Secure“ (první adaptér)
Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button on the front panel for 10 seconds.
4Press the Connecy & Secure button (second adapter)
Press the “Connect & Secure” button on the front panel of the second device for 10 seconds.
5 DomovskáLED bliká
The home icon LEDs should start blinking.
6Adapters are reset
All the LEDs must be green at the end of the operations.
Repeat the same operation for a third powerline. You can have up to eight Powerline 600 on the same electrical installation.
After pairing all the devices, you can put them in the room where you need them.