Hvordan vælger man den rigtige konfiguration med højt sikkerhedsniveau til sit powerline-netværk?

When setting up your powerline network, you can choose between two different high security configurations: High Security Level 1 and High Security Level 2.
• High Security Level 1 is the high security level that is natively implemented in our powerline products. The devices of your powerline network are protected by a default encryption key that is set up during the manufacturing of the product. This level provides a high security level that is suitable for consumer usage of the product. All our powerline products share the same default encryption key which enables you to use your powerline network right after plugging your devices. And you can also add new powerline devices to your existing STRONG network at any time and without any required configuration.
With High Security Level 1, your powerline network is already highly protected which ensures that even your neighbour cannot use your connection. How is that possible? To connect to your powerline network, someone must be directly in your flat or in your house. Your powerline network is more secured than any Wi-Fi network as it only uses your existing electrical wires which completely limits the radiation and the chances to hack your network.
Even if your neighbour is also equipped with the same powerline devices that have the same default encryption key, there is not even a slim chance for them to access your network due to all the signal losses encountered between the two flats/houses. Indeed, the signal must go through the two electrical meters (yours and your neighbour’s) which causes a loss of 20 dB on each side.

• Højt sikkerhedsniveau 2: Giver dig en forbedret sikkerhedsoplevelse ved at parre dine enheder og generere en ny, unik krypteringsnøgle til dit powerline-netværk. Derfor er det den perfekte løsning til at opfylde høje sikkerhedskrav, når du arbejder hjemmefra. Dette sikkerhedsniveau er utroligt nemt at konfigurere på dine STRONG powerline-produkter, da du blot skal trykke på parringsknappen på hver enhed i 2 sekunder, den ene efter den anden, efter at du har installeret alle dine enheder. Sørg for, at RJ45-Ethernet-forbindelsen fungerer på hver enhed, du ønsker at parre, for at undgå, at dine powerline-enheder switch går i standbytilstand.
Desuden bruger dine enheder ikke kun et af de to ovenfor definerede høje sikkerhedsniveauer, men deres kommunikation er også stærkt sikret ved hjælp af 128-BIT AES-datakryptering.
Med andre ord: Hvis du ønsker et højtydende, stabilt og pålideligt netværk, kan du bruge vores powerline-produkter med deres høje sikkerhedsniveauer. Den eneste beslutning, du skal træffe, er, om du vil vælge højt sikkerhedsniveau 1 eller konfigurere højt sikkerhedsniveau 2 – det er helt op til dig!