PL600SDUOEU

Δεν βρέθηκαν αντικείμενα.
Δεν βρέθηκαν αντικείμενα.

Όλες οι ερωτήσεις

PL600SDUOEU

Powerline 600 Duo EU V2

Δεν βρέθηκαν αντικείμενα.
Δεν βρέθηκαν αντικείμενα.

Δεν έχω πρόσβαση στο Διαδίκτυο και/ή η λυχνία LED του εικονιδίου «home» δεν ανάβει.

You must reset the adapters to their factory settings. To reset the adapters please follow the steps below:

 

1Connect the adapters to a power strip

Connect the adapters one after the other to a power strip.

  

2. Συνδέστετους προσαρμογείς στο Διαδίκτυο

Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.

  

3Press the Connect & Secure button (first device)

Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button on the front panel for 10 seconds.

  

4Press the Connect & Secure button (second device)

Press the “Connect & Secure” button on the front panel of the second device for 10 seconds. You have up to two minutes to do it.

    

λυχνία LED της αρχικής οθόνηςαναβοσβήνει

The home icon LED should start blinking.

  

6The adapters are reset

All the LEDs must be green at the end of the operations.
Repeat

 

Repeat the same operation for a third powerline. You can have up to 8 Powerline 600 on the same electrical installation.

 After pairing all the devices, you can put them in the room where you need them.

 
Ακολουθήστε μας
4 χρόνια αποποίησης ευθύνης εγγύησηςΑνακοίνωση σχετικά με τον Νόμο περί ΔεδομένωνΓενικός κανονισμός για την ασφάλεια των προϊόντων (GPSR) & χρήση της μπαταρίαςwhitelist αποθήκευσης ασφαλείαςΣυμμόρφωση PSTIΠολιτική αποκάλυψης ευπαθειώνΠολιτική εμπιστευτικότητας και απορρήτουΝομική ειδοποίηση και γενικοί όροι χρήσης