Powerline 600 Duo Wi-Fi UK V2
Όλες οι ερωτήσεις
Powerline 600 Duo Wi-Fi UK V2
Δεν έχω πρόσβαση στο Διαδίκτυο και/ή η λυχνία LED του εικονιδίου «home» δεν ανάβει.
Δεν έχω πρόσβαση στο Διαδίκτυο και/ή η λυχνία LED του εικονιδίου «home» δεν ανάβει.
You must reset the adapters to their factory settings. To reset the adapters, please follow the steps below.
1Put the adapters on a power strip
Connect the adapters one after the other to a power strip.
2. Συνδέστετους προσαρμογείς στο Διαδίκτυο
Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.
3 Πατήστετο κουμπί «Σύνδεση & Ασφάλεια» (πρώτος προσαρμογέας)
Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button on the front panel for 10 seconds.
4 Πατήστετο κουμπί «Σύνδεση & Ασφάλεια» (δεύτερος προσαρμογέας)
Press the “Connect & Secure” button on the front panel of the second device for 10 seconds. You have up to two minutes to do it.
5Ηλυχνία LED της αρχικής οθόνηςαναβοσβήνει
The home LEDs should start blinking.
6Adapters are reset
All the LEDs must be green at the end of the operations.
Repeat the same operation for a third powerline. You can have up to eight Powerline 600 on the same electrical installation.
After resetting all the devices, you can put them in the room where you need them.