Powerline 600 Triple Mini UK
Todas las preguntas
Powerline 600 Triple Mini UK
No tengo acceso a Internet y/o el LED del icono «Inicio» no se enciende.
You must reset the adapters to their factory settings. To reset the adapters, please follow the steps below.
1. Enchufalos adaptadores a una regleta.
Conecta los adaptadores uno tras otro a una regleta.
2. Conectalos adaptadores a Internet
Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.
3. Pulsael botón «Connect & Secure» (primer adaptador)
Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button located on the right side of the device for 15 seconds.
4. Pulsael botón «Connect & Secure» (segundo adaptador)
Press the “Connect & Secure” button located on the right side of the second device for 15 seconds.
5Homr LED blinks
The home icon LED should start blinking.
6Adapters are rest
All the LEDs must be green at the end of the operations.
Repeat
Repeat the same operation for a third powerline. You can have up to eight Powerline 600 Mini on the same electrical installation.
After pairing all the devices, you can put them in the room where you need them.