LEDs, buttons and ports

Do not waste your power outlets! Use the extra noise filtered power socket!

Each Powerline 1300 adapter is equipped with an extra noise filtered power socket. Do not waste any power outlet. Plug the Powerline 1300 adapter directly into the wall socket and use the extra noise filtered power socket to power your appliances or to plug in a power strip. The integrated noise filter reduces electrical interference and improves the performance of the powerline communications.

I do not have access to the Internet and/or the LED of the "home" icon does not light up.

You must reset the adapters to their factory settings. To reset the adapters please follow the steps below.

1Put the adapters on a power strip

Connect the adapters one after the other to a power strip.

2Connect the adapters to the Internet

Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.

3Press the Pair Button (first adapter)

Once the adapter is plugged in and connected to the Ethernet, simply press the “PAIR” button on the front panel for 10 seconds.

4Press the Pair Button (second adapter)

Press the “PAIR” button on the front panel of the second device for 10 seconds.

5Home LED blinks

The home icon LED should start blinking .

6Adapters are reset

All the LEDs must be green at the end of the operations.

Repeat the same operation for a third powerline. You can have up to eight Powerline 1300 on the same electrical installation.
After pairing all the devices, you can put them in the room where you need them.

Internet everywhere from any power socket!

The Powerline 1300 Kit which includes two Powerline 1300 adapters, creates a high-speed home network effortlessly by using your home’s existing electrical wiring at speeds up to 1300 Mbps. No new wire is required! Connect computers, consumer electronics and network compatible devices to the Internet in any room and any floor of your home by simply using a power outlet.

What do the icons and LEDs on the Powerline mean?

This illustration shows the status of the different LEDs of the powerline 1300.

Why do the Powerlines switch off on their own?

This is normal, Powerline 1300 automatically switch to sleep mode if no activity is detected. When a signal is detected on the Ethernet port, the Powerline 1300 will turn back on. It may take a few seconds for a Powerline 1300 in standby mode to detect a new activity and turn back on.
The automatic power saving mode reduces your consumption by up to 85%.