PLW600MDUO

Ei löytynyt kohteita.
Ei löytynyt kohteita.

Kaikki kysymykset

PLW600MDUO

Ei löytynyt kohteita.
Ei löytynyt kohteita.

Minulla ei ole pääsyä Internetiin ja/tai ”koti”-kuvakkeen LED-valo ei syty.

Säädinten tehdasasetukset on palautettava. Palauta säätimet noudattamalla seuraavia ohjeita.

1Plug the adapters into a power strip

Liitä sovittimet yksi toisensa jälkeen pistorasiaan.

Both Powerline adapters plugged into a power strip

2. Liitäsovittimet Internetiin

Connect each adapter to a working device (Internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be communication between the devices, otherwise the adapter will automatically go into standby mode.

Each adapter connected to a network device with an Ethernet cable

3. PainaConnect & Secure -painiketta (ensimmäinen sovitin)

Once the adapter is plugged in and connected to the Ethernet, press the Connect & Secure button on the right side of the device for 15 seconds.

Pressing the button on the first adapter for 15 seconds

4. Paina”Connect & Secure” -painiketta (toinen sovitin)

Press the Connect & Secure button on the right side of the second device for 15 seconds.

Pressing the button on the second adapter for 15 seconds

5The home LEDs blink

Kodissa olevien LED-valojen pitäisi alkaa vilkkua.

Home LEDs blinking on both adapters

6The devices are reset

All the LEDs must be green at the end of the operation.

All LEDs green on both adapters after reset

Repeat the same operation for a third powerline. You can have up to eight Powerline 600 Mini adapters on the same electrical installation. After resetting all the devices, you can put them in the rooms where you need them.

Seuraa meitä
4 vuoden takuu vastuuvapauslausekeTietosuojalain mukainen ilmoitusYleinen tuoteturvallisuusasetus (GPSR) & akun käyttöTurvallisuustallennuksen whitelistPSTI-vaatimustenmukaisuusHaavoittuvuuksien paljastamispolitiikkaLuottamuksellisuus- ja tietosuojakäytäntöOikeudellinen huomautus ja yleiset käyttöehdot