CPL 500 Duo | POWERL500DUO
Toutes les questions
CPL 500 Duo | POWERL500DUO
Je n'ai pas accès à Internet et/ou le voyant LED de l'icône « Maison » ne s'allume pas.
No Internet! Troubleshoot your Internet Access for your Powerline 500 Kit EU. If you do not have access to the internet, read this article to reset your powerline adapters.
Consultez d'autres questions fréquentes1Connect the adapters to a powerstrip
To troubleshoot your Internet Access, connect the adapters one after the other to a power strip.
2Connect the adapters to Internet
Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices. Otherwise, the adapter will automatically go into standby mode.
3Press the Connect & Secure button (first device)
Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button on the front panel for 10 seconds.
4Press the Connect & Secure button (second device)
Press the “Connect & Secure” button on the front panel of the second device for 10 seconds. You have up to two minutes to do it.
5Home icon blinks on the devices
The home icon LED should start blinking.
6Devices are reset
All the LEDs must be green at the end of the operations.
Repeat the same operation for a third powerline.
You can have up to 8 powerline 500 on the same electrical installation.
After pairing all the devices, you can put them in the room where you need them
