CPL 600 Duo Mini
Toutes les questions
I do not have access to the Internet and/or the LED of the "home" icon does not lightup.
Je n'ai pas accès à Internet et/ou le voyant de l'icône « Accueil » ne s'allume pas.
You must reset the adapters to their factory settings. To reset the adapters please
follow the steps below
1. Branchezles adaptateurs sur une multiprise
Connect the adapters one after the other to a power strip.
2Connect the adapter to the Internet
Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.
3Appuyez surle bouton « Connect & Secure » (premier adaptateur)
Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button located on the right side of the device for 15 seconds.
4Appuyez surle bouton « Connect & Secure » (deuxième adaptateur)
Press the “Connect & Secure” button located on the right side of the second device for 15 seconds.
5Le voyant LED « Home» clignote
The home icon LED should start blinking.
6Adapters are reset
All the LEDs must be green at the end of the operations.
Repeat the same operation for a third powerline. You can have up to eight Powerline 600 Mini on the same electrical installation.
After pairing all the devices, you can put them in the room where you need them.