Nema pronađenih stavki.

LEAP S3 | 4K Google TV Dolby Vision

Nema pronađenih stavki.

Sva pitanja

Nema pronađenih stavki.
Nema pronađenih stavki.

Kako mogu riješiti probleme na svom uređaju?

Izdati 

Mogući razlog 

Otopina 

No LED after power on
  • Adapter za napajanje nije pravilno spojen
Make sure the device is connected to the power.
Nema zvuka
  • TV je uključen na isključivanje zvuka ili je glasnoća tiha.
  • Uređaj je utišan ili je glasnoća preniska.
Press the mute button to restore the sound and increase
the volume.
Failed to connect to the
network
  • Wi-Fi je isključen ili je signal preslab.
  • Ethernet cable is not properly
    connected.
  • Ponovno pokrenite Wi-Fi ili prilagodite položaj uređaja bliže usmjerivaču.
  • Reconnect the cable
Kvar daljinskog upravljača• Remote control batteries are
low in power.
• The remote control is not paired any more
  • Replace the batteries.
  • Switch main power ON and pair remote by pressing the BACK& HOME buttons for 5 seconds. Wait until pair screen appears.
Ništa se ne prikazuje na ekranu
  • Wrong TV HDMI input.
  • Not use High resolution HDMI cable V2.1
  • Make sure that the correct HDMI port is selected as your TV input.
  • Check if you not are using  an old HDMI cable.
Voice search of the remote control is
not working
The remote control is not paired to the
Google TV Box
See the Pairing Bluetooth Device section of the User Manual.
Nema zvukaAudio Settings are not configured
properly for your TV
Access the settings by following these steps: Settings> Display & Sound
> Advanced sound settings
Pratite nas
Odricanje od 4 godine jamstvaObavijest o Zakonu o podacimaOpća uredba o sigurnosti proizvoda (GPSR) i korištenje baterijeSigurnosna pohrana whitelistPSTI usklađenostPolitika otkrivanja ranjivostiPolitika povjerljivosti i privatnostiPravna obavijest i Opći uvjeti korištenja