Powerline 1000 Duo Wi-Fi FR V2
Sva pitanja
Powerline 1000 Duo Wi-Fi FR V2
Nemam pristup internetu i/ili LED ikone "početna" ne svijetli.
You must reset the adapters to their factory settings. To reset the adapters, please follow the steps below.
1 Uključite adaptere u produžni kabel
Connect the adapters one after the other to a power strip.
2. Spojite adaptere na internet
Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.
3Press the Pair button (first adapter)
Once the adapter is plugged in and connected to the Ethernet, simply press the “PAIR” button on the right side of the device for 10 seconds.
4Press the Pair button (second adapter)
Press the “PAIR” button located on the right side of the second device for 10 seconds. You have up to two minutes to do it.
5 LED lampica za dom treperi
The home LEDs should start blinking.
6Adapters are reset
All the LEDs must be green at the end of the operations.
Repeat the same operation for a third powerline. You can have up to eight Powerline 1000 on the same electrical installation.
After resetting all the devices, you can put them in the room where you need them.