Mesh Wi-Fi 6 ATRIA 3000 (add-on)
Tutte le domande
Mesh Wi-Fi 6 ATRIA 3000 (add-on)
Mesh Wi-Fi 6 ATRIA 3000 (confezione da 2)
Mesh Wi-Fi 6 ATRIA 3000 (confezione da 3)
Posso configurare una rete per gli ospiti nella mia rete Mesh ? (Caso 1: interfaccia utente web)
To access the Web UI, you must be connected to the Wi-Fi of your device after connection the RJ45 cable in the WLAN port of your device and of the internet box.
1Connect to the Wi-Fi of the device
Per farlo, inserisci l'SSID (nome della rete Wi-Fi) e la password Wi-Fi del router sul tuo dispositivo:
2. Accedereall'indirizzo IP dell'interfaccia utente web
Then, enter the following IP address in your browser: 192.168.7.254 or type the following address : http://atria3000.mesh
3. Inseriscile tue credenziali
You must enter the Username (admin) and Password (admin) (please note that after the first connection you will create your personal admin password which means that the password written on the product label will not work any more). Then, click Login.
4WLAN 2.4G and 5G
Then click WLAN in the top bar, go to the 2.4G or the 5G section depending on which network type you are on and then, click in Multiple SSID.
5Multiple SSID set-up
Now, click on Enable for the new Guest Wi-Fi you want to add to the network, you can modify the SSID (Wi-Fi Network Name) and set-up a unique Password. You can also choose the Authentication type and hide the SSID if you want to.
6Save the modifications
Click Save & Apply.
7Check the new Wi-Fi Network
The new guest network is now visible in the Wi-Fi Network list of your devices.
