ROUTERBE3600

Nessun articolo trovato.
Nessun articolo trovato.

Tutte le domande

Nessun articolo trovato.
Nessun articolo trovato.

Come si configura il router per la prima volta?

  • Unfold the 5 antennas and position them vertically.
  • Connect one end of the supplied Cat6 cable to the WAN/2.5G (blue) port on the router and the other end to a LAN port on your modem or Internet box.
  • Connect the DC 12 V / 1.5 A power adapter and plug into the mains.
  • Wait approximately 60 seconds. The LED turns orange during startup, then green when the Internet connection is active.
  • Connect your device to the Wi-Fi network STRONG_WiFi7_XXXX using the password on the label under the router.
  • Open a browser and navigate to http://192.168.1.1 to access the Web UI.

Warning: Connect to a LAN port on your modem — never to its WAN/Internet port. The ROUTERBE3600 has no built-in modem and requires an existing Internet box.

Tips: You can also connect a PC directly to a yellow LAN port to access the Web UI without Wi-Fi.

Seguiteci
4 anni di garanziaAvviso relativo alla legge sulla protezione dei datiRegolamento generale sulla sicurezza dei prodotti (GPSR) e utilizzo delle batteriewhitelist di archiviazione di sicurezzaConformità al PSTIPolitica di divulgazione delle vulnerabilitàPolitica di riservatezza e privacyAvviso legale e condizioni generali di utilizzo