Powerline 1000 Duo Wi-Fi Mini

Geen items gevonden.
Geen items gevonden.

Alle vragen

Powerline 1000 Duo Wi-Fi Mini

Geen items gevonden.
Geen items gevonden.

Ik heb geen toegang tot internet en/of het LED-lampje van het „home“-pictogram brandt niet.

You must reset the adapters to their factory settings. To reset the adapters, please follow the steps below.

1Put the adapters on a power strip

Connect the adapters one after the other to a power strip. 

    

2. Sluitde adapters aanop het internet

Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode. 

    

3. Druk opde knop ‘Connect & Secure’ (eerste adapter)

Once the adapter is plugged in and connected to the Ethernet, simply press the Connect & Secure button on the right side of the device for 15 seconds.

    

4. Druk opde knop ‘Connect & Secure’ (tweede adapter)

Press the Connect & Secure button located on the right side of the second device for 15 seconds.    

5Home-LED knippert

The home LEDs should start blinking.

 

6Adapters are reset

All the LEDs must be green at the end of the operations.

 

Repeat the same operation for a third powerline. You can have up to eight Powerline 1000 Mini on the same electrical installation. 

After resetting all the devices, you can put them in the room where you need them.

Volg ons
4 jaar garantie disclaimerKennisgeving inzake de Wet op de gegevensbeschermingAlgemene productveiligheidsverordening (GPSR) & batterijgebruikwhitelist voor beveiligingsopslagConformiteit met PSTIBeleid voor openbaarmaking van kwetsbaarhedenVertrouwelijkheid en privacyWettelijke kennisgeving en algemene gebruiksvoorwaarden