ATRIA Mesh add-on 1200 UK
Alle spørsmål
ATRIA Mesh add-on 1200 UK
Hvordan kan jeg sette/tildele en statisk IP-adresse for Atria-enheten min? Mesh 1200 enheter? (App)
It can be interesting to set a static IP for you mesh controller to have an easier access to the Web
UI on your network in the Atria Mesh app.
You can also allocate dedicated IP Addresses to the devices connected on your mesh network in
the Web UI.
1Connect to the Wi-Fi of your mesh
For å gjøre dette, koble til Wi-Fi-nettverket ditt mesh nettverk.
2Access the App
Connect to the Atria Mesh App.
3Network
Klikk på Mitt nettverk .
4Select the main mesh unit
Klikk på navnet til Mesh Agent på listen.
5Find the IP Address
Identifiser IP-adressen og MAC-adressen.
6Write down the IP Address
Skriv ned IP-adressen og MAC-adressen.
7Internet Settings
Klikk på Internett-innstillinger .
8Static IP
Select Static IP. Enter the following information before clicking Save:
o IP: Enter the IP Address of the Agent
o Mask: The field is automatically populated with the appropriate value
o Gateway: The field is automatically populated with the appropriate value
o DNS1: Enter the primary DNS address (you can find this information in the Web UI :
Network > LAN -> Enable Manual DNS)
o DNS2: Enter the secondary DNS address (you can find this information in the Web UI
: Network > LAN -> Enable Manual DNS)
