Dual Band Repeater 750 V2
Ingen gjenstander funnet.
Ingen gjenstander funnet.
Alle spørsmål
Dual Band Repeater 750 V2
Ingen gjenstander funnet.
Ingen gjenstander funnet.
Hvordan konfigurerer jeg repeateren min som et tilgangspunkt?
TIPS: Before configuring your repeater, please check the following procedure to determine the location of your repeater: What is the best location for my repeater?
1 Koble til nettgrensesnittet
Følg én av fremgangsmåtene nedenfor for å koble til nettgrensesnittet:
- Hvordan kobler jeg til repeaterens nettgrensesnitt? (RJ45-kabel)
- Hvordan kobler jeg til repeaterens nettgrensesnitt? (Wi-Fi)
2Select the Access Point mode
On the mode switch located on the right side of your repeater, select the AP position.
3AP Wizard
Click AP Wizard.
4Access Point set up
Select the Static IP option to configure your network. Enter a name for each SSID and select the security type of your network, we recommend using the WPA2-PSK option. Click Apply to confirm.
TIPS: You will be able to connect to the Web UI by using the IP address of the repeater..
5Wait during the configuration
Vent mens repeateren konfigureres.
Warning: Write down the passwords and the names of the Wi-Fi networks.