ATRIA Wi-Fi 5 Mesh System 2100 ( add-on )

To optimize you coverage you should install the mesh in the location where you have coverage issues in order to cover the widest area possible in your home.

Please make sure that the mesh units are not located in a room where there is a load bearing wall, as the wall is thicker the Wi-Fi signal can have issues getting through it.

1Unoptimized Mesh Installation

The following schema shows Wi-Fi coverage inside a house where mesh nodes are not located in the right area of the house to have a proper coverage.

2Optimized Mesh Installation

The following schema shows Wi-Fi coverage inside a house where mesh nodes are located in the right area of the house to have a proper coverage.

1Atria Mesh App

Download the application for smartphone "ATRIA MESH" on the App Store or the Google Play Store.

2 Tilkobling til Wi-Fi

Koble til Wi-Fi-nettverket ditt mesh enhet.

3 legitimasjonsbevis

Deretter må du være koblet til Wi-Fi-en til Mesh med smarttelefonen din, og logg deretter inn på appen med påloggingsinformasjonen din, som skal være « admin » og « admin » hvis du ikke har endret den.

4 Mitt nettverk

Klikk på Mitt nettverk .

5Name of the Mesh

You will see the name of the mesh units you configured on your network.

Click on the name of the mesh unit to access its information.

6Name

Click on the name field.

7Change controller name

Enter a new name and click Save:

The mesh controller should be named like this: MeshAX3000-Main- Nameoftheroom
The mesh agents should be named like this: MeshAX3000-Nameoftheroom

Warning: If the mesh unit appears in grey it means that it is not providing enough coverage and that you should adjust its location to optimize the mesh network.

Følg oss