Mesh ATRIA Wi-Fi 5 Mesh 2100 (add-on)
Wszystkie pytania
Mesh ATRIA Wi-Fi 5 Mesh 2100 (add-on)
Jak powinienem skonfigurować sieć „ Mesh ”, aby zoptymalizować działanie mojej sieci Wi-Fi?
To optimize you coverage you should install the mesh in the location where you have coverage issues in order to cover the widest area possible in your home.
Please make sure that the mesh units are not located in a room where there is a load bearing wall, as the wall is thicker the Wi-Fi signal can have issues getting through it.
1Unoptimized Mesh Installation
The following schema shows Wi-Fi coverage inside a house where mesh nodes are not located in the right area of the house to have a proper coverage.
2Optimized Mesh Installation
The following schema shows Wi-Fi coverage inside a house where mesh nodes are located in the right area of the house to have a proper coverage.
1Atria– aplikacja „ Mesh ”
Pobierz aplikację na smartfony„ATRIA MESH ” ze sklepu App Store lub Google Play.
2Connexion to the Wi-Fi
Connect to the Wi-Fi of your mesh unit.
3. Dane uwierzytelniające
Następnie musisz połączyć swój smartfon z siecią Wi-Fi urządzenia „ Mesh ”, a potem zalogować się do aplikacji przy użyciu danych logowania, które powinny brzmieć„admin” i„admin”, o ile ich nie zmieniłeś.
4 Mojasieć
Kliknij opcję „Moja sieć”.
5Name of the Mesh
You will see the name of the mesh units you configured on your network.
Click on the name of the mesh unit to access its information.
6Name
Click on the name field.
7Change controller name
Enter a new name and click Save:
- The mesh controller should be named like this: MeshAX3000-Main- Nameoftheroom
- The mesh agents should be named like this: MeshAX3000-Nameoftheroom
Warning: If the mesh unit appears in grey it means that it is not providing enough coverage and that you should adjust its location to optimize the mesh network.