Powerline 1000 Duo Wi-Fi EU V2

Nenhum item encontrado.
Nenhum item encontrado.

Todas as perguntas

Powerline 1000 Duo Wi-Fi EU V2

Nenhum item encontrado.
Nenhum item encontrado.

I do not have access to the Internet and/or the LED of the "home" icon does not light up

You must reset the adapters to their factory settings. To reset the adapters, please follow the steps below.

 

1Put the adapters on a power strip

Connect the adapters one after the other to a power strip.

 

2Ligaros adaptadores à Internet

Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.

 

3Press the PAIR button (first adapter)

Once the adapter is plugged in and connected to the Ethernet, simply press the “PAIR” button on the right side of the device for 10 seconds.

 

4Press the PAIR button (second adapter)

Press the “PAIR” button located on the right side of the second device for 10 seconds.

  

A luz LED «5Home» pisca

The home LEDs should start blinking.

 

6Adapters are reset

All the LEDs must be green at the end of the operations.

 

Repeat the same operation for a third powerline. You can have up to eight Powerline 1000 on the same electrical installation.
After resetting all the devices, you can put them in the room where you need them.

 
Siga-nos
4 anos de garantiaAviso relativo à Lei de Proteção de DadosRegulamento Geral sobre a Segurança dos Produtos (RGPD) e utilização da bateriawhitelist armazenamento de segurançaConformidade com o PSTIPolítica de divulgação de vulnerabilidadesPolítica de confidencialidade e privacidadeAviso legal e condições gerais de utilização