ROUTERBE3600
Nenašli sa žiadne položky.
Nenašli sa žiadne položky.
Všetky otázky
ROUTERBE3600
Nenašli sa žiadne položky.
Nenašli sa žiadne položky.
Ako mám router nastaviť po prvýkrát?
- Unfold the 5 antennas and position them vertically.
- Connect one end of the supplied Cat6 cable to the WAN/2.5G (blue) port on the router and the other end to a LAN port on your modem or Internet box.
- Connect the DC 12 V / 1.5 A power adapter and plug into the mains.
- Wait approximately 60 seconds. The LED turns orange during startup, then green when the Internet connection is active.
- Connect your device to the Wi-Fi network STRONG_WiFi7_XXXX using the password on the label under the router.
- Open a browser and navigate to http://192.168.1.1 to access the Web UI.
Warning: Connect to a LAN port on your modem — never to its WAN/Internet port. The ROUTERBE3600 has no built-in modem and requires an existing Internet box.
Tips: You can also connect a PC directly to a yellow LAN port to access the Web UI without Wi-Fi.