HD KÁBLOVÝ PRIJÍMAČ SRT3032
Všetky otázky
HD KÁBLOVÝ PRIJÍMAČ SRT3032
Ako môžem riešiť problémy so svojím zariadením?
<Problem> | <Possible cause> | <What to do> |
LED indicator not lit | Mains lead unplugged | Check mains plug |
No signal found | Cable input is disconnected Orange signal LED is Off | Check cable lead Check with dealer |
No picture or sound on TV or amplifier | Na televízore alebo zosilňovači nie je zvolený vstup HDMI alebo SCART, alebo je zariadenie nastavené na vyššie rozlíšenie, než aké televízor podporuje. TV/amplifier is not switched on | Switch to correct TV/amplifier input Select lower resolution on receiver Switch Televízor/zosilňovač je zapnutý. |
Scrambled channel message | Channel is scrambled | Select alternative channel |
No response to remote control | Receiver off Remote not aimed correctly Front panel obstructed Remote batteries exhausted | Plug in and turn on plug Aim remote at front panel Check for obstructions Replace remote batteries |
Forgotten PIN code Forgotten channel lock code | Default PIN is 0000 Contact local Service Hotline or send email to our Support via www.strong.tv | |
Signals are interrupted or blocking is visible on screen | Cable signals are too weak or have reflections/interference. | Press the <INFO> button on remote 2x to call up signal bars and check your cable connections and leads. Using (many) splitters in the signal lead might cause reflections/interference in the digital signal and distort reception. When in doubt, check with your dealer. |
Prijímač sa automaticky vypne. | Funkcia automatického prechodu do pohotovostného režimu je zapnutá. | Disable auto standby. See chapter <7.4.3> for details. |
Playback of video (or Timeshift) is causing picture freeze/macro blocks or similar distortion, especially on HD content. | Rýchlosť čítania a zápisu vášho USB zariadenia môže byť príliš nízka. | Uistite sa, že používate USB pamäťové zariadenie s dostatočnou rýchlosťou a kapacitou. Flash disky („USB sticks“) nemusia poskytovať dostatočnú rýchlosť. |