ATRIA Wi-Fi 5 Mesh System 2100 UK (3-pack)
Сва питања
ATRIA Wi-Fi 5 Mesh System 2100 UK (3-pack)
Како да конфигуришем свој Wi-Fi mesh мрежа
Да бисте конфигурисали свој Mesh мрежу, погледајте Брза упутства која се налазе у кутији вашег производа.
1CASE 1: Using the WPS Button
You must plug in the mesh unit to turn it on (there is no power button on the device) and connect it to your modem by using a RJ45 cable.
2Wait for the configuration
Затим, морате сачекати неколико минута да се уређај конфигурише.
3Second Mesh unit
You must plugin the second mesh unit.
4LED
Press the WPS button for at least 4 seconds on the Mesh unit that is connected to your modem/router.
The LED will blink in blue after activating the WPS.
5WPS second Mesh
Press the WPS button for at least 4 seconds on the second Mesh unit.
6LED pairing
When the devices are being paired the LED is bliking in blue. please wait a few minutes for the pairing process to complete.
Once, the devices are paired, the LEDs are blue on both devices.
1CASE 2: Using Ethernet Cable
You must plug in the mesh unit to turn it on (there is no power button on the device) and connect it to your modem by using a RJ45 cable.
2Plug the second Mesh to the main Mesh
Морате укључити други mesh уређај да бисте га укључили, а затим га повежите са главним mesh уређај (LAN порт) помоћу RJ45 кабла.
3Second Mesh unit
Wait a few minutes for both mesh units to detect the Internet configuration. Once the LEDs are blue on both devices, they are configured.