Powerline 600 Duo Wi-Fi UK V2
Всички въпроси
Powerline 600 Duo Wi-Fi UK V2
Нямам достъп до интернет и/или светодиодът на иконата „Начало“ не свети.
Нямам достъп до интернет и/или светодиодът на иконата „Начало“ не свети.
You must reset the adapters to their factory settings. To reset the adapters, please follow the steps below.
1Put the adapters on a power strip
Connect the adapters one after the other to a power strip.
2. Свържетеадаптерите с интернет
Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.
3Натиснетебутона „Connect & Secure“ (първият адаптер)
Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button on the front panel for 10 seconds.
4Натиснетебутона „Connect & Secure“ (вторият адаптер)
Press the “Connect & Secure” button on the front panel of the second device for 10 seconds. You have up to two minutes to do it.
5HomeLED мига
The home LEDs should start blinking.
6Adapters are reset
All the LEDs must be green at the end of the operations.
Repeat the same operation for a third powerline. You can have up to eight Powerline 600 on the same electrical installation.
After resetting all the devices, you can put them in the room where you need them.