Powerline 1000 Duo Wi-Fi Mini UK
Všechny otázky
Powerline 1000 Duo Wi-Fi Mini UK
Nemám přístup k internetu a/nebo nesvítí LED kontrolka u ikony „domů“
You must reset the adapters to their factory settings. To reset the adapters please follow the steps below:
1. Připojteadaptéry k prodlužovacímu kabelu s vypínačem
Connect the adapters one after the other to a power strip.
2. Připojteadaptéry k internetu
Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices, otherwise the adapter will automatically go into standby mode.
3Press the Connect & Secure button (first device)
Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button on the right side of the device for 10 seconds.
4Press the Connect & Secure button (second device)
Press the “Connect & Secure” button located on the right side of the second device for 10 seconds.
5 DomovskáLED bliká
The home LEDs should start blinking.
6Adapters are reset
All the LEDs must be green at the end of the operations.
Repeat the same operation for a third powerline. You can have up to eight Powerline 1000 Mini on the same electrical installation.
After resetting all the devices, you can put them in the room where you need them.