PLW600MDUO
Alle spørgsmål
PLW600MDUO
Jeg har ikke adgang til internettet, og/eller LED-lampen på »hjem«-ikonet lyser ikke.
Du skal nulstille adapterne til fabriksindstillingerne. Følg nedenstående trin for at nulstille adapterne.
1Plug the adapters into a power strip
Tilslut adapterne én efter én til en stikdåse.

2. Tilslutadapterne til internettet
Connect each adapter to a working device (Internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be communication between the devices, otherwise the adapter will automatically go into standby mode.

3Tryk påknappen »Connect & Secure« (første adapter)
Once the adapter is plugged in and connected to the Ethernet, press the Connect & Secure button on the right side of the device for 15 seconds.

4Tryk påknappen »Connect & Secure« (den anden adapter)
Press the Connect & Secure button on the right side of the second device for 15 seconds.

5The home LEDs blink
LED-lamperne i hjemmet bør begynde at blinke.

6The devices are reset
All the LEDs must be green at the end of the operation.

Repeat the same operation for a third powerline. You can have up to eight Powerline 600 Mini adapters on the same electrical installation. After resetting all the devices, you can put them in the rooms where you need them.