PLW600MDUO
Όλες οι ερωτήσεις
Δεν έχω πρόσβαση στο Διαδίκτυο και/ή η λυχνία LED του εικονιδίου «home» δεν ανάβει.
Πρέπει να επαναφέρετε τους προσαρμογείς στις εργοστασιακές τους ρυθμίσεις. Για να επαναφέρετε τους προσαρμογείς, ακολουθήστε τα παρακάτω βήματα.
1Plug the adapters into a power strip
Συνδέστε τους προσαρμογείς ο ένας μετά τον άλλο σε ένα πολύπριζο.

2. Συνδέστετους προσαρμογείς στο Διαδίκτυο
Connect each adapter to a working device (Internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be communication between the devices, otherwise the adapter will automatically go into standby mode.

3 Πατήστετο κουμπί «Σύνδεση & Ασφάλεια» (πρώτος προσαρμογέας)
Once the adapter is plugged in and connected to the Ethernet, press the Connect & Secure button on the right side of the device for 15 seconds.

4 Πατήστετο κουμπί «Σύνδεση & Ασφάλεια» (δεύτερος προσαρμογέας)
Press the Connect & Secure button on the right side of the second device for 15 seconds.

5The home LEDs blink
Τα LED του σπιτιού θα αρχίσουν να αναβοσβήνουν.

6The devices are reset
All the LEDs must be green at the end of the operation.

Repeat the same operation for a third powerline. You can have up to eight Powerline 600 Mini adapters on the same electrical installation. After resetting all the devices, you can put them in the rooms where you need them.