Wi-Fi and network troubleshooting

Can I connect Powerlines of different brands and data rates to my network?

It is possible to connect powerlines with different data rates and brands as our devices use the HomePlug AV2/AV standard which makes any device compatible no matter the brand or data rates. For instance, you can connect a powerline 1000 with a powerline 1200 or 1300 as they have similar data rates. That is why, we strongly
recommend not to connect a powerline 1000 with powerline 500 or 600 which have lower data rates as the maximum data rate is lower than the one of the powerline 1000. On the other hand, we also advise you against connecting a powerline 1000 with a powerline 2000 as the data rate of the powerline 2000 will be limited to the maximum data rate of the powerline 1000. In addition, a Powerline 1000 can be connected to powerlines 1000 of different brands but we cannot guarantee that it will work properly with powerlines 1000 from other brands, as there may be software differences.

Can I repeat the Wi-Fi network of the Internet box with the Powerline 1000 Wi-Fi?

No, the Powerline 1000 Wi-Fi is not a repeater, you should not try to connect it by WPS to the box, it is a Wi-Fi access point which will have another network name than the one of your internet box.

Connect all your bandwidth hungry wired devices to the Internet using your existing electrical wiring!

Use the Powerline Wi-Fi 1000 Kit to connect all your bandwidth hungry wired devices to the Internet, such as IPTV decoder, Smart TV, Android box, Apple TV ®, media player, computer, games console … The Powerline Wi-Fi 1000 adapter is equipped with 1 Ethernet port. Connect all of your network compatible devices to the Internet in minutes! No system requirements! No software to install! Just Plug & Play.

Expand your Powerline network to any room of your home by adding Powerline 1000 adapters!

Congrats! You managed to install your Powerline 1000 Kit. Now, you want to extend your network to other parts of your home to connect even more devices to your network.
Just add a new Powerline 1000 adapter in the room of your choice. Then, connect your new Powerline 1000 adapter to the existing network in a few seconds by pressing the “PAIR” button. No system requirements! No software to install! Just Plug & Play.

How many Powerline 1000 can I connect to the same network?

You can have up to eight Powerline 1000 in your home within the limit of a single electric meter.

How to add a new strong powerline product to your existing powerline Wi-Fi network with High Security Level 1?

As your existing network has been set with the High Security Level 1 configuration, adding a product is simply Plug & Play. No action is required on the product. Just plug in the new powerline product and it will be automatically added to the network.
Typically, powerline adapters are paired by sets of two or three, so if you need to add additional powerline products to your network that is configured with high security level 1, you must follow the steps below.

1Plug the new adapter in a socket

Plug the additional device(s) in a power socket.

2Connect the adapter to the Internet

Connect the device to an internet router/gateway by RJ45.

3The adapter is set

After plugging the new device, all the LEDs are green on all the devices.

How to choose the right high security level configuration for your powerline network?

When setting up your powerline network, you can choose between two different high security configurations: High Security Level 1 and High Security Level 2.
• High Security Level 1 is the high security level that is natively implemented in our powerline products. The devices of your powerline network are protected by a default encryption key that is set up during the manufacturing of the product. This level provides a high security level that is suitable for consumer usage of the product. All our powerline products share the same default encryption key which enables you to use your powerline network right after plugging your devices. And you can also add new powerline devices to your existing STRONG network at any time and without any required configuration.
With High Security Level 1, your powerline network is already highly protected which ensures that even your neighbour cannot use your connection. How is that possible? To connect to your powerline network, someone must be directly in your flat or in your house. Your powerline network is more secured than any Wi-Fi network as it only uses your existing electrical wires which completely limits the radiation and the chances to hack your network.

Even if your neighbour is also equipped with the same powerline devices that have the same default encryption key, there is not even a slim chance for them to access your network due to all the signal losses encountered between the two flats/houses. Indeed, the signal must go through the two electrical meters (yours and your neighbour’s) which causes a loss of 20 dB on each side.

• High Security Level 2: Offers you an enhanced security experience by pairing your devices and generating a new unique encryption key for your powerline network. That is why, it is the perfect solution to comply with high security requirements when working from home. This security level is amazingly easy to configure on your STRONG powerline products as you just need to press the pairing button on each device for 2 seconds one after the other after installing all your devices. Please make sure that the RJ45 Ethernet connection is working on each device that you want to pair to avoid that your powerline devices switch to standby mode.
Moreover, your devices not only use one of two high security levels defined above, but their communication is also highly secured by the 128-BIT AES data encryption.
In other words, if you want a high performant, stable and reliable network, you can use our powerline products with their high security levels. The only decision you must make is if you will go with High Security Level 1 or configure High Security Level 2, which is up to you!

How to configure new powerline products with High Security Level 2 on your existing powerline Wi-Fi network?

Please note that if you want to add more than one new powerline product, each product must be configured one after the other by following the same process. And not simultaneously. Typically, powerline adapters are paired by sets of two so if you need to add new powerline products to your network that is configured with high security level 2, you must follow the steps below.

1Plug the new adapter in a socket

Plug the additional device(s) in a power socket.

2Connect the new adapter to the Internet

Connect the device to an internet router/gateway by RJ45.

3Press the PAIR button (existing adapter)

Press the “PAIR” button on one of the existing devices of the network for two seconds.

4Press the PAIR button (new adapter)

Then, press the “PAIR” button of the new device for two seconds to add it to the network. You have up to two minutes to press the button.

5The Home LED blinks

The home LED should start blinking in green on the devices.

6LEDs are green

After adding the new device, the home LEDs should be green on both devices.

7The encryption key is set

Your new unique encryption key is set on the device you just configured.

How to configure your powerline Wi-Fi network with High Security Level 1?

High Security level 1 is the default high security configuration level implemented on all our powerline products. You just have to plug your powerline devices and this high security configuration will be automatically implemented. Plug & Play. No action is required on the product.

How to set up High Security Level 2 on your powerline products?

1Put the adapters on a power strip

Take a power strip and plug all the powerline adapters on it.

2Connect the adapters to the Internet

Connect the adapters to the internet gateway/router with a RJ45 cable.

3Press the PAIR button (first device)

Then, press the “PAIR” button for 2 seconds on the first device.

4Press the PAIR button (second device)

Press the “PAIR” button on the second device for 2 seconds. You have up to two minutes to do it.

5Home LED blinks

The home led should blink on the two devices.

6The encryption key is set

Your unique encryption key is now set, and all the LEDs of the devices should be green.

Now, you must install the adapters in the rooms where you need them. We strongly recommend not to put the adapters on a multiplug.

I receive Internet via fibre, is a Powerline 1000 suitable?

A Powerline 1000 is sufficient, it will allow you to benefit from all the potential speed offered by your internet service provider. If you want a powerline network that matches your fibre optic speed, you must ensure that your electrical installation complies with standards and use powerlines equipped with Gigabit ports. Powerlines 1000, 1200, 1300 or 2000 are equipped with them.

The Internet speed is much lower at the output of the powerline network compared to the speed at the output of the Internet service provider's box. Why?

The data rate displayed on the Powerline 1000 (as well as all Powerline 1000 on the market) is the maximum data rate used for the transmission of signals on the link. The useful speed is lower than the maximum speed because the transmission of data always requires a significant use of the band, which reduces the available bandwidth.
The quality of your electrical installation can further reduce the available bandwidth and you will usually get less than 1000 Mbps.
An overly extensive or old electrical installation can significantly increase the data rate loss. Potentially disruptive electrical devices left plugged in unnecessarily can also significantly increase throughput losses. (e.g., telephone charger, power transformer, etc.).
For information, to transmit an HD signal, 5 Mbps is sufficient, to transmit a UHD (4K) signal, 20 Mbps is sufficient.

Why is my 2.4GHz Wi-Fi experiencing interruptions, and how can changing the channel to 1, 6, or 11 help?

Interruptions in your 2.4GHz WiFi connection are often due to interference. This frequency band is commonly used by various devices such as microwaves, cordless phones, and baby monitors, as well as by many WiFi networks. When multiple devices operate on the same or overlapping channels, it can cause interference, leading to slower speeds, connection drops, and other performance issues.

To minimize interference, we recommend changing your WiFi channel to 1, 6, or 11. These channels are spaced far enough apart to avoid overlapping with each other, which reduces the chances of interference from other networks and devices operating nearby. By selecting one of these channels, you can improve the stability and performance of your WiFi connection.

To change the channel, access your Powerline Wi-Fi device settings through its web interface. Look for the WLAN Settings > Basic Settings section, choose Channel 1, 6, or 11.

1Connect to the Wi-Fi

To do so, enter the SSID and password of the router in your device.

2Enter the Web UI IP Address

Then, enter the following IP address in your browser: http://strong.500.ap

3Login Page

Once you have browsed to the IP Address, click, you must enter the username (admin). Then, click Sign in.

4WLAN Settings

Click on WLAN Settings and Basic Settings.

5Select the Network Band

Select the network band between 2.4G and 5G. Then, select the channel in the dropdown list (1,6 or 11) and click Save.